Latest Products
Manual Pallet Truck 2 Tons Hand Hydraulic Forklift 4400lbs（2000kg）Load Capacity 60.6'' x 21.7 '' x 47.2 ''
- Product SKU: 10030430410811
- Order within
Introduction ：
ECVV pallet truck is made of steel, has a pump handle and mold-on nylon casters or PU casters, and is suitable for lifting and transporting pallets. Steel resists wear and corrosion. The loop-shaped pump handle can be used to jack up the forks and maneuver the pallet truck. The handle is rubber-coated for grip. A trigger on the handle releases and lowers the forks. Nose wheels and the forks' tapered ends facilitate loading. The mold-on nylon wheels support heavy loads and won't mark or scratch floors. Push rods allow the height of each fork to be adjusted in case of an imbalance. The pallet truck has an overload bypass valve for safety. This pallet truck has a load capacity of 4400 lb., weighs 158 lb., and measures 60.6 x 21.7 x 47.2 inches overall (H x W x L). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.) It has a service range of 3 to 7.5 inches high. The forks are 45" long.
Features:
- Heavy-duty frame structure, cast iron pump.
- Strong robotic welding frame and nice profile.
- Grease nipples on the thrust plate and rock arm.
- 210 degrees handle turning and foot lowering feature.
Specifications:
|
Weight Capacity：
|
2000kg
|
|
Maximum Fork Height：
|
190mm
|
|
Minimum Fork Height：
|
80mm
|
|
Fork Length：
|
1150mm |
|
Width Between Forks /Width Across Forks:
|
230mm / 550mm |
|
Small Caster diameter:
|
Φ 80×58mm |
|
Big Caster diameter:
|
Φ 180×50mm |
|
Net Weight： |
70-73kg |
Introduction ：
ECVV pallet truck is made of steel, has a pump handle and mold-on nylon casters or PU casters, and is suitable for lifting and transporting pallets. Steel resists wear and corrosion. The loop-shaped pump handle can be used to jack up the forks and maneuver the pallet truck. The handle is rubber-coated for grip. A trigger on the handle releases and lowers the forks. Nose wheels and the forks' tapered ends facilitate loading. The mold-on nylon wheels support heavy loads and won't mark or scratch floors. Push rods allow the height of each fork to be adjusted in case of an imbalance. The pallet truck has an overload bypass valve for safety. This pallet truck has a load capacity of 4400 lb., weighs 158 lb., and measures 60.6 x 21.7 x 47.2 inches overall (H x W x L). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.) It has a service range of 3 to 7.5 inches high. The forks are 45" long.
Features:
- Heavy-duty frame structure, cast iron pump.
- Strong robotic welding frame and nice profile.
- Grease nipples on the thrust plate and rock arm.
- 210 degrees handle turning and foot lowering feature.
Specifications:
| Weight Capacity： | 2000kg |
| Maximum Fork Height： | 190mm |
| Minimum Fork Height： | 80mm |
| Fork Length： |
1150mm |
| Width Between Forks /Width Across Forks: |
230mm / 550mm |
| Small Caster diameter: |
Φ 80×58mm |
| Big Caster diameter: |
Φ 180×50mm |
|
Net Weight： |
70-73kg |
